FiberOptic probes
Multi-fiber link for complex environments
SEDI-ATI offers fiber optic on/off probes consisting of bundles of optical fibers resistant to +600°C in order to perform tip timing measurements during engine tests.
Majorconstraints
- High-temperatures: > +600°C,
- Mechanical stress: chocs, vibrations, low bend radius.
Thechallenge
Approaching multi-fiber optical links in a very high-temperature and highly vibrating turbine environment.
Aero-engine turbines put to the test
Turbine blades are critical parts of aeronautic engines. They are subjected to high mechanical stresses at very high temperatures. In the event of breakage, the integrity of the engine, or even of the aircraft, can be compromised.
Principle of the optical measurement
We use what we call “on/off probes” made out of bundles of fibers to perform the optical measurement that relies on the photon-emission/photon-reception principle.
An emitting fiber is used to illuminate the blades. The reflection on the blades is captured by the collecting fibers placed around the emitting fiber. The optical signals are then analyzed and interpreted using specific algorithms.
In aircraft engines, turbine blades are parts that operate at very high temperatures. SEDI-ATI designs quality optical probes that can withstand +600°C.
What is tip-timing?
Tip-timing is involved in the qualification of engines and turboshafts. This technique enables to monitor the vibratory modes of turbine blades in operation and to detect possible blade deformations.
Measuring blades deformation using optical fibers
The campaign of tests consists in mounting optical probes on the engine casing, in front of the blades, in order to measure their time of passage. The amplitude of vibration of each blade as it passes in front of the reflection probes can be deducted from the passage times of the blades and the speed of rotation.
SEDI-ATIsolution
On/Off optical probes consisting in bundle assemblies of optical fibers resistant to +600°C, and soldered at the tip.
Advantagesof the SEDI-ATI solution
- Our fiber assemblies withstand engine and turboshafts testing conditions.
Related product
Fiber optic bundle high-temperature reflection probe with screw cap
We offer bifurcated fiber-optic reflection probe bundles with a threaded tip for high-temperatures up to +400 °C.
High-temperature optical fiber patch cords
You are working at high-temperature levels? SEDI-ATI Fibre Optiques has the solution! Indeed, we have designed high-temperature cables for applications ranging from 150 °C to 1000 °C.
Reflection probe fiber bundle for 400°C applications – disconnectable probe
We offer disconnectable bifurcated fiber-optic reflection probe bundles for high-temperatures up to +400 °C.
